EPrices/CHANGELOG.md

EPrices – Changelog

v1.2.1 — 2026-04-07

ESP32 main task stack size increase

Increased the FreeRTOS main application task stack from the ESP-IDF default of 8192 bytes to 16384 bytes. This eliminates the stack overflow scenario that most likely caused the spontaneous reboot observed in production on 2026-04-06, where the FreeRTOS idle task faulted following memory pressure during a simultaneous NVS load and HTTP fetch/parse cycle.

The 8 KB cost is well within the ESP32's 320 KB available RAM.

Changed location in eprices.yaml:

• esp32: framework: sdkconfig_options: — added CONFIG_ESP_MAIN_TASK_STACK_SIZE: "16384"

---

Price vector heap pre-allocation at boot

Pre-allocated capacity for all four price vectors at boot using .reserve(96). Previously, each vector started empty and grew incrementally on every NVS load and HTTP fetch, triggering repeated heap reallocations and leaving the heap fragmented before the first fetch cycle completed.

With capacity reserved upfront, no reallocation occurs during any subsequent NVS load or HTTP parse operation. This reduces heap fragmentation and peak allocation spikes, particularly during the boot sequence where NVS load and the first HTTP fetch can overlap.

Vectors pre-allocated:

• price_timestamps_today
• price_values_today
• price_timestamps_tomorrow
• price_values_tomorrow

Changed location in eprices.yaml:

• on_boot: lambda — added .reserve(96) on all four price vectors

---

Hourly JSON sensor cleared state unified with 15-min sensors

The two hourly JSON text sensors previously published "[]" when cleared (at midnight bridge and on clear_today_prices / clear_tomorrow_prices). The six 15-minute JSON sensors already published "" in the same situation. All eight JSON sensors now publish "" when cleared, giving consistent behaviour across the full sensor set.

Affected sensors:

• Today JSON Hourly Prices EUR⁄kWh
• Tomorrow JSON Hourly Prices EUR⁄kWh

Changed locations in eprices.yaml:

• clear_today_prices script — "[]" → ""
• clear_tomorrow_prices script — "[]" → ""
• midnight_bridge_promotion script — "[]" → "" (where applicable)

---

v1.2 — 2026-04-06

HTTP fetch stuck-flag watchdog

Fixed a reliability issue where an HTTP fetch that stalled at the TCP level (connection accepted by the server but data delivery suspended) could hold is_updating_today or is_updating_tomorrow locked at true indefinitely. While the flag was stuck, all subsequent auto-retry triggers and manual button presses were silently blocked.

Root cause: The application-level 25 s HTTP timeout does not fire when the TCP connection is established but the server stops sending data mid-transfer. The socket never goes idle from the OS perspective, so the timeout never triggers, and the fetch hangs until the TCP stack eventually resets the connection — which can take several minutes.

Fix: Added a 120-second watchdog to both the today and tomorrow worker loops (seconds: /10). If is_updating_* has been true for more than 120 seconds, the worker force-clears the flag and sets the status message to "Fetch timeout – will retry". The next scheduled retry or manual press then proceeds normally.

New globals:

• is_updating_today_since (time_t) — timestamp when is_updating_today was last set to true
• is_updating_tomorrow_since (time_t) — timestamp when is_updating_tomorrow was last set to true

Both timestamps are set immediately alongside is_updating_* = true inside smart_price_update and smart_tomorrow_price_update.

Changed locations in eprices.yaml:

• globals: — added is_updating_today_since and is_updating_tomorrow_since
• smart_price_update script — added id(is_updating_today_since) = ... alongside flag set
• smart_tomorrow_price_update script — added id(is_updating_tomorrow_since) = ... alongside flag set
• Today worker (seconds: /10) — watchdog block added before existing worker logic
• Tomorrow worker (seconds: /10) — watchdog block added before existing worker logic

---

Tomorrow auto-retry attempt counter fix

Fixed a bug where tomorrow_retry_count was not incremented in the 13:55 and 14:55–19:55 hourly retry triggers. Those triggers called smart_tomorrow_price_update directly without incrementing the counter first, causing the Tomorrow API Fetch Attempts diagnostic sensor to undercount attempts after the first one at 13:25.

Changed locations in eprices.yaml:

• 13:55 trigger — added id(tomorrow_retry_count)++ before .execute()
• 14:55–19:55 hourly trigger — added id(tomorrow_retry_count)++ before .execute()

---

Status message improvements

Two status message strings that contained a hardcoded time reference have been corrected. Both were misleading after a device reboot in the afternoon or a manual clear_tomorrow_prices call outside the normal fetch window.

Location	Old value	New value
tomorrow_update_status_message global initial_value	"Waiting for 13:20"	"No data yet"
clear_tomorrow_prices script end	"Cleared – awaiting next 13:20 window"	"Cleared – awaiting fetch window"

---

v1.1 — 2026-04-06

Negative price provider fee support

Added a separate provider fee multiplier for negative spot prices, configurable via secrets.yaml. This correctly models contracts where the provider fee structure differs between positive and negative market prices.

New secret key:

eprices_neg_prov_fee: "0.30"

New global: neg_prov_fee (type: double)

Price calculation is now:

Market price	Formula
Positive (raw_mwh >= 0)	(raw / 1000) × (1 + prov_fee) × (1 + vat_rate)
Negative (raw_mwh < 0)	(raw / 1000) × (1 - neg_prov_fee) × (1 + vat_rate)

Key values for eprices_neg_prov_fee:

Value	Meaning
"0.30"	Provider keeps 30%, pays you 70% of negative price
"0.00"	Provider passes full negative price to you (no fee)

Switch point: raw API price (raw_mwh) before any multiplier is applied.

VAT: applied symmetrically to both positive and negative prices, consistent with net billing models where VAT is calculated on the monthly net sum (mathematically equivalent due to VAT being a linear multiplier).

Changed files: eprices.yaml, secrets.yaml

Changed locations in eprices.yaml:

• substitutions: — added neg_prov_fee_value
• globals: — added neg_prov_fee
• parse_energy_charts_today_script — MULT split into MULT_POS / MULT_NEG
• parse_energy_charts_tomorrow_script — MULT split into MULT_POS / MULT_NEG

---

v1.0 — 2026-04-05

Initial release of EPrices.

---

Project & device renames

Item	Value
ESPHome node name	eprices
Friendly name	EPrices
Helper file	eprices_nvs.h
C++ namespace	eprices_nvs
NVS partition namespace	eprices
Secret key prefix	eprices_

---

Secrets file keys

wifi_ssid
wifi_password
eprices_fallback_ap_ssid
eprices_fallback_ap_password
eprices_api_encryption_key
eprices_timezone          # e.g. "Europe/Ljubljana"
eprices_country_bzn       # e.g. "SI"
eprices_prov_fee          # e.g. "0.12"  (provider fee as decimal multiplier)
eprices_vat_rate          # e.g. "0.22"  (VAT rate as decimal multiplier)

---

Sensors

Numeric sensors (sensor:)

Name	Entity ID	Notes
Today Current Price	sensor.eprices_today_current_price
Today Next Price	sensor.eprices_today_next_price
Today Average Price	sensor.eprices_today_average_price
Today Highest Price	sensor.eprices_today_highest_price
Today Lowest Price	sensor.eprices_today_lowest_price
Today Current Hourly Price	sensor.eprices_today_current_hourly_price
Today Next Hourly Price	sensor.eprices_today_next_hourly_price
Today Highest Hourly Price	sensor.eprices_today_highest_hourly_price
Today Lowest Hourly Price	sensor.eprices_today_lowest_hourly_price
Today Current Max Hourly Price Percentage	sensor.eprices_today_current_max_hourly_price_percentage
Tomorrow Current Price	sensor.eprices_tomorrow_current_price	Evaluates at now + 86400s
Tomorrow Next Price	sensor.eprices_tomorrow_next_price	Evaluates at now + 86400s
Tomorrow Average Price	sensor.eprices_tomorrow_average_price
Tomorrow Highest Price	sensor.eprices_tomorrow_highest_price
Tomorrow Lowest Price	sensor.eprices_tomorrow_lowest_price
Tomorrow Current Hourly Price	sensor.eprices_tomorrow_current_hourly_price	Evaluates at now + 86400s
Tomorrow Next Hourly Price	sensor.eprices_tomorrow_next_hourly_price	Evaluates at now + 86400s
Tomorrow Highest Hourly Price	sensor.eprices_tomorrow_highest_hourly_price
Tomorrow Lowest Hourly Price	sensor.eprices_tomorrow_lowest_hourly_price
Tomorrow Current Max Hourly Price Percentage	sensor.eprices_tomorrow_current_max_hourly_price_percentage	Evaluates at now + 86400s
WiFi Signal	sensor.eprices_wifi_signal	dBm, diagnostic
Uptime	sensor.eprices_uptime	Human-readable string, diagnostic

Text sensors (text_sensor:)

Name	Entity ID	Notes
Today JSON Hourly Prices EUR⁄kWh	sensor.eprices_today_json_hourly_prices_eur_kwh	JSON array, 24 values; "" when no data
Today JSON 15-Min Prices EUR⁄kWh (P1 00:00-07:45)	sensor.eprices_today_json_15_min_prices_eur_kwh_p1_00_00_07_45	JSON array, 32 values; "" when no data
Today JSON 15-Min Prices EUR⁄kWh (P2 08:00-15:45)	sensor.eprices_today_json_15_min_prices_eur_kwh_p2_08_00_15_45	JSON array, 32 values; "" when no data
Today JSON 15-Min Prices EUR⁄kWh (P3 16:00-23:45)	sensor.eprices_today_json_15_min_prices_eur_kwh_p3_16_00_23_45	JSON array, 32 values; "" when no data
Today Highest Price Time	sensor.eprices_today_highest_price_time	HH:MM
Today Lowest Price Time	sensor.eprices_today_lowest_price_time	HH:MM
Today Highest Hourly Price Time	sensor.eprices_today_highest_hourly_price_time	HH:00
Today Lowest Hourly Price Time	sensor.eprices_today_lowest_hourly_price_time	HH:00
Today Current Price Status	sensor.eprices_today_current_price_status	Valid / Missing / Stale
Today Data Loaded Time	sensor.eprices_today_data_loaded_time	Stamped on NVS load and HTTP fetch
Today Last API Fetch Time	sensor.eprices_today_last_api_fetch_time	Stamped on HTTP fetch only; Never if NVS only; diagnostic
Today Price Update Status	sensor.eprices_today_price_update_status	SUCCESS / FAILED/WAITING; diagnostic
Today Price Update Status Message	sensor.eprices_today_price_update_status_message	Detailed status string; diagnostic
Today API Fetch Attempts	sensor.eprices_today_api_fetch_attempts	HTTP fetch count; resets at midnight; diagnostic
Today Entry Count	sensor.eprices_today_entry_count	Number of stored price points; diagnostic
Tomorrow JSON Hourly Prices EUR⁄kWh	sensor.eprices_tomorrow_json_hourly_prices_eur_kwh	JSON array, 24 values; "" when no data
Tomorrow JSON 15-Min Prices EUR⁄kWh (P1 00:00-07:45)	sensor.eprices_tomorrow_json_15_min_prices_eur_kwh_p1_00_00_07_45	JSON array, 32 values; "" when no data
Tomorrow JSON 15-Min Prices EUR⁄kWh (P2 08:00-15:45)	sensor.eprices_tomorrow_json_15_min_prices_eur_kwh_p2_08_00_15_45	JSON array, 32 values; "" when no data
Tomorrow JSON 15-Min Prices EUR⁄kWh (P3 16:00-23:45)	sensor.eprices_tomorrow_json_15_min_prices_eur_kwh_p3_16_00_23_45	JSON array, 32 values; "" when no data
Tomorrow Highest Price Time	sensor.eprices_tomorrow_highest_price_time	HH:MM
Tomorrow Lowest Price Time	sensor.eprices_tomorrow_lowest_price_time	HH:MM
Tomorrow Highest Hourly Price Time	sensor.eprices_tomorrow_highest_hourly_price_time	HH:00
Tomorrow Lowest Hourly Price Time	sensor.eprices_tomorrow_lowest_hourly_price_time	HH:00
Tomorrow Current Price Status	sensor.eprices_tomorrow_current_price_status	Valid / Missing / Waiting...
Tomorrow Data Loaded Time	sensor.eprices_tomorrow_data_loaded_time	Stamped on NVS load and HTTP fetch; Outside fetch window before 13:20
Tomorrow Last API Fetch Time	sensor.eprices_tomorrow_last_api_fetch_time	Stamped on HTTP fetch only; Never if NVS only; diagnostic
Tomorrow Price Update Status	sensor.eprices_tomorrow_price_update_status	SUCCESS / FAILED/WAITING; diagnostic
Tomorrow Price Update Status Message	sensor.eprices_tomorrow_price_update_status_message	Detailed status string; diagnostic
Tomorrow API Fetch Attempts	sensor.eprices_tomorrow_api_fetch_attempts	HTTP fetch count; resets at 13:25; diagnostic
Tomorrow Entry Count	sensor.eprices_tomorrow_entry_count	Number of stored price points; diagnostic
Last Reboot	sensor.eprices_last_reboot	Boot timestamp; diagnostic
Last Update Source	sensor.eprices_last_update_source	NVS_boot / HTTP_today / midnight_bridge etc.; diagnostic
Today NVS Status	sensor.eprices_today_nvs_status	NVS load/store result; diagnostic
Tomorrow NVS Status	sensor.eprices_tomorrow_nvs_status	NVS load/store result; diagnostic
Today Data Date	sensor.eprices_today_data_date	Date of stored today data; diagnostic
Tomorrow Data Date	sensor.eprices_tomorrow_data_date	Date of stored tomorrow data; diagnostic

Buttons

Name	Entity ID
Force Today's Update	button.eprices_force_today_s_update
Force Tomorrow's Update	button.eprices_force_tomorrow_s_update
Reboot Device	button.eprices_reboot_device

---

Key behaviours

• Price calculation: price_eur_kwh = (raw_eur_mwh / 1000) × (1 + prov_fee) × (1 + vat_rate)
• Negative prices: formatted as %.3f (3 decimal places) to stay within the 255-character HA text sensor state limit; positive prices use %.4f
• DST-safe: all price indexing uses UNIX timestamps and binary search — no hour-slot arithmetic
• NVS persistence: prices survive reboots; stale data (date mismatch) is discarded and triggers a fresh HTTP fetch
• Today Current Price Status shows Stale if stored date does not match today's date
• Tomorrow live sensors evaluate at now + 86400s so they reflect tomorrow at the same local time
• Tomorrow Data Loaded Time shows Outside fetch window when device boots before 13:20
• API fetch times reset to Never at midnight bridge and on clear_tomorrow_prices
• API fetch attempt counters reset to 0 at midnight and publish 0 immediately on boot
• Uptime displayed as human-readable string: 45 s / 5 min / 3 h 22 min / 12 d 4 h / 4 months 12 d
• JSON sensors publish "" (empty string) when no data is available — all eight JSON sensors behave consistently