![EPrices Header](eprices_header_image.png)

# EPrices

An ESPHome-based ESP32 firmware that fetches **day-ahead electricity spot prices**
from the public [Energy-Charts API](https://api.energy-charts.info) and exposes
them as Home Assistant sensors — with no cloud subscription, no API token, and
no external dependencies beyond your WiFi network.

All core logic runs entirely on the ESP32 — midnight bridge, boot recovery,
retry scheduling, and NVS persistence are all on-device. No external Home
Assistant automations are required for any core functionality.

---

## Features

- Fetches **15-minute resolution** spot prices for **today** and **tomorrow**
- Automatically applies your **provider fee** and **VAT rate** to raw €/MWh prices —
  with **separate fee configuration for negative spot prices**
- Exposes **96 per-day price points** plus **24-hour averages** as JSON text sensors
  for use in HA automations and dashboards
- **NVS persistence** — prices survive device reboots without re-fetching
- **Midnight bridge** — tomorrow's data automatically becomes today at 00:00, fully on-device
- **Auto-retry logic** — up to 8 HTTP fetch attempts for both today and tomorrow,
  with a **120-second stuck-fetch watchdog** that unblocks retries after TCP-level stalls
- **DST-safe** — uses UNIX timestamps and binary search throughout, no hour-slot arithmetic
- **Staleness detection** — `Today Current Price Status` shows `Stale` if stored date mismatches today
- **Tomorrow live sensors** evaluate at `now + 86400s` — reflecting tomorrow at the same local time
- Supports **any Energy-Charts bidding zone** (SI, DE-LU, AT, FR, HR, HU and more)
- Full **diagnostic sensor suite** — NVS status, fetch attempts, API fetch times,
  data loaded times, WiFi signal, human-readable uptime
- All fee and VAT settings configurable via `secrets.yaml` — **no code changes needed**

---

## Hardware

- **ESP32** development board (tested on `esp32dev`)
- ESPHome with **`esp-idf` framework** (required for NVS flash support)

---

## Files

| File | Purpose |
|---|---|
| `eprices.yaml` | Main ESPHome configuration |
| `eprices_nvs.h` | NVS helper — save/load price arrays to ESP32 flash |
| `secrets.yaml` | Your local secrets (not committed to git) |
| `CHANGELOG.md` | Complete sensor and entity ID reference |
| `VERSION.md` | Version history and release notes |
| `ENTSO-E-PRICES-MIGRATION.md` | Optional — migration guide from the predecessor project |

---

## Installation

### 1) Clone or download this repository

### 2) Create your `secrets.yaml`

Place `secrets.yaml` in the same directory as `eprices.yaml`.
It must contain the following keys:

```yaml
wifi_ssid: "your_wifi_ssid"
wifi_password: "your_wifi_password"
eprices_fallback_ap_ssid: "EPrices-Fallback"
eprices_fallback_ap_password: "your_fallback_ap_password"
eprices_api_encryption_key: "your_base64_api_encryption_key_here"
eprices_timezone: "Europe/Ljubljana"
eprices_country_bzn: "SI"
eprices_prov_fee: "0.12"
eprices_vat_rate: "0.22"
eprices_neg_prov_fee: "0.30"
```

**Key descriptions:**

| Key | Description |
|---|---|
| `eprices_timezone` | Your local timezone — must match a valid [IANA tz name](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) |
| `eprices_country_bzn` | Energy-Charts bidding zone code — see [supported zones](#supported-bidding-zones) |
| `eprices_prov_fee` | Provider fee for **positive** spot prices — decimal multiplier, e.g. `"0.12"` = 12% |
| `eprices_vat_rate` | VAT rate — decimal multiplier, e.g. `"0.22"` = 22% |
| `eprices_neg_prov_fee` | Provider fee kept on **negative** spot prices — decimal multiplier, e.g. `"0.30"` means provider keeps 30%, pays you 70%; use `"0.00"` if provider passes the full negative price to you |
| `eprices_api_encryption_key` | 32-byte base64 key for HA API encryption — generate with `openssl rand -base64 32` |

### 3) Flash to your ESP32

```bash
esphome run eprices.yaml
```

Or use the ESPHome Dashboard or the HA ESPHome add-on.

### 4) Add to Home Assistant

The device will appear automatically in HA via the ESPHome integration.
Accept the device and enter your API encryption key when prompted.

---

## Supported bidding zones

Any zone supported by the [Energy-Charts API](https://api.energy-charts.info)
`/price` endpoint. Common examples:

| Code | Zone |
|---|---|
| `SI` | Slovenia |
| `DE-LU` | Germany / Luxembourg |
| `AT` | Austria |
| `FR` | France |
| `IT-North` | Italy North |
| `HR` | Croatia |
| `HU` | Hungary |

For the full list see the [Energy-Charts API documentation](https://api.energy-charts.info).

---

## How it works

### Price fetch schedule

| Event | Action |
|---|---|
| Boot | Load today + tomorrow from NVS flash; HTTP fetch if NVS miss or stale |
| 00:00 midnight | Promote tomorrow → today; clear tomorrow; schedule tomorrow fetch if in window |
| 00:05, 00:15, 00:30, then hourly :30 | Auto-retry today fetch if previous attempt failed (max 8) |
| 13:25 | First auto-fetch attempt for tomorrow |
| 13:55, 14:55 … 19:55 | Retry tomorrow fetch if previous attempt failed (max 8 total) |
| Manual button press | Force immediate fetch for today or tomorrow |

### Stuck-fetch watchdog

If an HTTP request stalls at the TCP level (connection accepted but data
delivery suspended), the 25 s application timeout may not fire. In that case
the `is_updating_*` flag can stay `true` for several minutes, blocking all
subsequent retries and manual button presses.

The worker loop checks every 10 seconds: if `is_updating_today` or
`is_updating_tomorrow` has been `true` for more than **120 seconds**, the flag
is force-cleared and the status message is set to `"Fetch timeout – will retry"`.
The next scheduled trigger or manual press then proceeds normally.

### Price calculation

Raw prices from the API are in **€/MWh**. EPrices converts them to **€/kWh**
and applies your provider fee and VAT. Positive and negative spot prices use
separate fee multipliers, configurable independently in `secrets.yaml`:

| Market price | Formula |
|---|---|
| Positive (`raw ≥ 0`) | `(raw / 1000) × (1 + prov_fee) × (1 + vat_rate)` |
| Negative (`raw < 0`) | `(raw / 1000) × (1 - neg_prov_fee) × (1 + vat_rate)` |

The switch happens on the **raw API price** before any multiplier is applied.
VAT is applied to both cases, consistent with net billing contracts where VAT
is calculated on the monthly net sum (mathematically equivalent due to VAT
being a linear multiplier).

**Example with `prov_fee = 0.12`, `neg_prov_fee = 0.30`, `vat_rate = 0.22`:**
- Spot price `+100 €/MWh` → `(100/1000) × 1.12 × 1.22` = **0.1366 €/kWh** (you pay)
- Spot price `−50 €/MWh` → `(−50/1000) × 0.70 × 1.22` = **−0.0427 €/kWh** (you receive)

### Negative prices

On days with high solar or wind generation, spot prices can go negative.
EPrices handles negative prices correctly throughout. In the 15-min JSON
sensors, negative values are formatted with 3 decimal places (e.g. `-0.057`)
instead of 4, to stay within the 255-character Home Assistant text sensor
state limit. Precision loss is at most 0.0001 €/kWh (0.01 cent).

### NVS persistence

Prices are stored in ESP32 NVS (non-volatile storage) under the `eprices`
namespace using dynamic timestamp + price arrays. On reboot, stored prices
are validated against today's and tomorrow's date before use. Stale data
is discarded and a fresh HTTP fetch is triggered automatically.

### DST safety

All price indexing uses UNIX timestamps and binary search. There is no
hour-slot arithmetic anywhere in the codebase, making the firmware fully
safe on DST transition days (23-hour and 25-hour days).

---

## Sensors

### Today — numeric

| Sensor | Entity ID | Description |
|---|---|---|
| Today Current Price | `sensor.eprices_today_current_price` | Current 15-min slot price €/kWh |
| Today Next Price | `sensor.eprices_today_next_price` | Next 15-min slot price €/kWh |
| Today Average Price | `sensor.eprices_today_average_price` | Average of all hourly prices €/kWh |
| Today Highest Price | `sensor.eprices_today_highest_price` | Highest 15-min price €/kWh |
| Today Lowest Price | `sensor.eprices_today_lowest_price` | Lowest 15-min price €/kWh |
| Today Current Hourly Price | `sensor.eprices_today_current_hourly_price` | Current hour average €/kWh |
| Today Next Hourly Price | `sensor.eprices_today_next_hourly_price` | Next hour average €/kWh |
| Today Highest Hourly Price | `sensor.eprices_today_highest_hourly_price` | Highest hourly average €/kWh |
| Today Lowest Hourly Price | `sensor.eprices_today_lowest_hourly_price` | Lowest hourly average €/kWh |
| Today Current Max Hourly Price Percentage | `sensor.eprices_today_current_max_hourly_price_percentage` | Current hour as % of daily max |

### Today — text

| Sensor | Entity ID | Description |
|---|---|---|
| Today JSON Hourly Prices EUR⁄kWh | `sensor.eprices_today_json_hourly_prices_eur_kwh` | JSON array of 24 hourly averages |
| Today JSON 15-Min Prices EUR⁄kWh (P1 00:00-07:45) | `sensor.eprices_today_json_15_min_prices_eur_kwh_p1_00_00_07_45` | JSON array of 32 prices |
| Today JSON 15-Min Prices EUR⁄kWh (P2 08:00-15:45) | `sensor.eprices_today_json_15_min_prices_eur_kwh_p2_08_00_15_45` | JSON array of 32 prices |
| Today JSON 15-Min Prices EUR⁄kWh (P3 16:00-23:45) | `sensor.eprices_today_json_15_min_prices_eur_kwh_p3_16_00_23_45` | JSON array of 32 prices |
| Today Highest Price Time | `sensor.eprices_today_highest_price_time` | Time of highest 15-min price (HH:MM) |
| Today Lowest Price Time | `sensor.eprices_today_lowest_price_time` | Time of lowest 15-min price (HH:MM) |
| Today Highest Hourly Price Time | `sensor.eprices_today_highest_hourly_price_time` | Time of highest hourly average (HH:00) |
| Today Lowest Hourly Price Time | `sensor.eprices_today_lowest_hourly_price_time` | Time of lowest hourly average (HH:00) |
| Today Current Price Status | `sensor.eprices_today_current_price_status` | `Valid` / `Missing` / `Stale` |
| Today Data Loaded Time | `sensor.eprices_today_data_loaded_time` | Last time today data entered memory (NVS or HTTP) |

### Tomorrow — numeric

| Sensor | Entity ID | Description |
|---|---|---|
| Tomorrow Current Price | `sensor.eprices_tomorrow_current_price` | Tomorrow at same local time as now |
| Tomorrow Next Price | `sensor.eprices_tomorrow_next_price` | Tomorrow next 15-min slot |
| Tomorrow Average Price | `sensor.eprices_tomorrow_average_price` | Average of all hourly prices €/kWh |
| Tomorrow Highest Price | `sensor.eprices_tomorrow_highest_price` | Highest 15-min price €/kWh |
| Tomorrow Lowest Price | `sensor.eprices_tomorrow_lowest_price` | Lowest 15-min price €/kWh |
| Tomorrow Current Hourly Price | `sensor.eprices_tomorrow_current_hourly_price` | Tomorrow same hour average €/kWh |
| Tomorrow Next Hourly Price | `sensor.eprices_tomorrow_next_hourly_price` | Tomorrow next hour average €/kWh |
| Tomorrow Highest Hourly Price | `sensor.eprices_tomorrow_highest_hourly_price` | Highest hourly average €/kWh |
| Tomorrow Lowest Hourly Price | `sensor.eprices_tomorrow_lowest_hourly_price` | Lowest hourly average €/kWh |
| Tomorrow Current Max Hourly Price Percentage | `sensor.eprices_tomorrow_current_max_hourly_price_percentage` | Same-time hour as % of tomorrow max |

### Tomorrow — text

| Sensor | Entity ID | Description |
|---|---|---|
| Tomorrow JSON Hourly Prices EUR⁄kWh | `sensor.eprices_tomorrow_json_hourly_prices_eur_kwh` | JSON array of 24 hourly averages |
| Tomorrow JSON 15-Min Prices EUR⁄kWh (P1 00:00-07:45) | `sensor.eprices_tomorrow_json_15_min_prices_eur_kwh_p1_00_00_07_45` | JSON array of 32 prices |
| Tomorrow JSON 15-Min Prices EUR⁄kWh (P2 08:00-15:45) | `sensor.eprices_tomorrow_json_15_min_prices_eur_kwh_p2_08_00_15_45` | JSON array of 32 prices |
| Tomorrow JSON 15-Min Prices EUR⁄kWh (P3 16:00-23:45) | `sensor.eprices_tomorrow_json_15_min_prices_eur_kwh_p3_16_00_23_45` | JSON array of 32 prices |
| Tomorrow Highest Price Time | `sensor.eprices_tomorrow_highest_price_time` | Time of highest 15-min price (HH:MM) |
| Tomorrow Lowest Price Time | `sensor.eprices_tomorrow_lowest_price_time` | Time of lowest 15-min price (HH:MM) |
| Tomorrow Highest Hourly Price Time | `sensor.eprices_tomorrow_highest_hourly_price_time` | Time of highest hourly average (HH:00) |
| Tomorrow Lowest Hourly Price Time | `sensor.eprices_tomorrow_lowest_hourly_price_time` | Time of lowest hourly average (HH:00) |
| Tomorrow Current Price Status | `sensor.eprices_tomorrow_current_price_status` | `Valid` / `Missing` / `Waiting...` |
| Tomorrow Data Loaded Time | `sensor.eprices_tomorrow_data_loaded_time` | Last time tomorrow data entered memory; `Outside fetch window` before 13:20 |

### Diagnostic

| Sensor | Entity ID | Description |
|---|---|---|
| Last Reboot | `sensor.eprices_last_reboot` | Timestamp of last device boot |
| Uptime | `sensor.eprices_uptime` | Human-readable: `45 s` / `5 min` / `3 h 22 min` / `12 d 4 h` / `4 months 12 d` |
| WiFi Signal | `sensor.eprices_wifi_signal` | RSSI in dBm, updated every 60s |
| Last Update Source | `sensor.eprices_last_update_source` | `NVS_boot` / `HTTP_today` / `midnight_bridge` / `NVS_api` etc. |
| Today Data Date | `sensor.eprices_today_data_date` | Date of currently stored today data |
| Tomorrow Data Date | `sensor.eprices_tomorrow_data_date` | Date of currently stored tomorrow data |
| Today Entry Count | `sensor.eprices_today_entry_count` | Number of price points stored for today |
| Tomorrow Entry Count | `sensor.eprices_tomorrow_entry_count` | Number of price points stored for tomorrow |
| Today NVS Status | `sensor.eprices_today_nvs_status` | NVS load/store result for today |
| Tomorrow NVS Status | `sensor.eprices_tomorrow_nvs_status` | NVS load/store result for tomorrow |
| Today Last API Fetch Time | `sensor.eprices_today_last_api_fetch_time` | Timestamp of last successful HTTP fetch for today; `Never` if NVS only |
| Tomorrow Last API Fetch Time | `sensor.eprices_tomorrow_last_api_fetch_time` | Timestamp of last successful HTTP fetch for tomorrow; `Never` if NVS only |
| Today API Fetch Attempts | `sensor.eprices_today_api_fetch_attempts` | HTTP fetch attempt count for today; resets at midnight |
| Tomorrow API Fetch Attempts | `sensor.eprices_tomorrow_api_fetch_attempts` | HTTP fetch attempt count for tomorrow; resets at 13:25 |
| Today Price Update Status | `sensor.eprices_today_price_update_status` | `SUCCESS` / `FAILED/WAITING` |
| Tomorrow Price Update Status | `sensor.eprices_tomorrow_price_update_status` | `SUCCESS` / `FAILED/WAITING` |
| Today Price Update Status Message | `sensor.eprices_today_price_update_status_message` | Detailed status string |
| Tomorrow Price Update Status Message | `sensor.eprices_tomorrow_price_update_status_message` | Detailed status string; `"Fetch timeout – will retry"` after watchdog trigger |

### Buttons

| Button | Entity ID | Description |
|---|---|---|
| Force Today's Update | `button.eprices_force_today_s_update` | Trigger immediate today HTTP fetch |
| Force Tomorrow's Update | `button.eprices_force_tomorrow_s_update` | Trigger immediate tomorrow fetch (window: 13:20–23:50) |
| Reboot Device | `button.eprices_reboot_device` | Restart the ESP32 |

---

## Migrating from entso-e-prices

If you are migrating from the predecessor project entso-e-prices v4.3.1,
see [ENTSO-E-PRICES-MIGRATION.md](ENTSO-E-PRICES-MIGRATION.md) for the
complete rationale, all sensor rename mappings, and a migration checklist.

---

## Data attribution

Electricity price data provided by
**[Energy-Charts](https://energy-charts.info)** (Fraunhofer ISE)
via the [Energy-Charts API](https://api.energy-charts.info),
licensed under [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/).

---

## License

This project (ESPHome YAML and C++ helper) is released under the
[MIT License](LICENSE).